Hellwig Sway Bar 7686 Manual de usuario descargar pdf

INSTALLATION INSTRUCTIONS

REAR STABILIZER BAR

2007 TAHOE, SUBRUBAN, AVALANCHE

2WD & 4WD

Thank you for purchasing a quality Hellwig Product.

PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION

7686 ( R-7686 ) 08/25/2006

TORQUE TABLE

BOLT SIZE: 3/8” = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – ½” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs.

SAFETY: BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND CHOCK TIRES.

NOTE: TO EASE INSTALLATION AND TO PROPERLY ADJUST BAR, THE WEIGHT OF THE VEHICLE MUSTBE ON THE

SUSPENSION, AS IF DRIVING DOWN THE ROAD. DO NOT RAISE VEHICLEBY FRAME.

NOTE: THIS UNIT IS DESIGNED TO REPLACE THE FACTORY INSALLED FRONT SWAY BAR USING THE FACTORY END

LINKS.

1. Remove the factory installed rear sway bar. Keep the end link attaching hardware as it will be used to attach the new sway bar.

2. Lubricate the D-bushings with supplied grease and install on sway bar in location to match factory mounting points. Place U-plates over D-

bushings.

3. Raise sway bar to frame and install using supplied hardware.Leave loose at this time to allow for adjustment

4. Re-attach factory end links to sway bar ends and tighten to factory specification.

5. Torque the U-plate mounting bolts to 20-25 ft-lb.

6. Bounce the vehicle and check for clearance on all the undercarriage components. Be sure that all nuts and bolts securely tightened. Check and see

that all suspension components, wires, fuel and brake lines etc. are all clear of this installation and cannot be damaged. Recheck your installation

after one (1) week of driving and every thirty days thereafter.

ATTENTION INSTALLER: BE SURE THAT THE CUSTOMER RECEIVES THIS INSTRUCTION SHEET, ALL IMORTANT NOTE

CARDS AND THE WARRANTY FORM

559-734-7451 800-367-5480 FAX 559-734-7460

INSTALLATION INSTRUCTIONSREAR STABILIZER BAR2007 TAHOE, SUBRUBAN, AVALANCHE2WD & 4WDThank you for purchasing a quality Hellwig Product.PLEASE READ

Sin comentarios

Hellwig Sway Bar 7686 Manual de usuario